Home > Media & Resource > Blog

European crane| Dongqi European crane

24 Feb, 2016

 The concept of European cranes is formed within the industry in recent years, this kind crane is different from the conventional so-called domestic, the Soviet Union (USSR) where traditional cranes. The European Crane series mainly includes overhead cranes, gantry cranes, jib cranes, explosion-proof cranes and other industrial cranes.

European crane

European craneEuropean crane

European crane brief introduction

European style single girder overhead cranes have the design concepts of small dimension, light dead weight and so on. Compared with traditional crane, European style single girder overhead crane has the minimum limiting distance from hook to wall, lower headroom and higher lifting height. With these features, the European style single girder overhead crane could provide the workplace with more effective working space. As a result of it, the workplace could be designed smaller than before but with more functions. In addition, the wheel pressure is also decrease because the dead weight than before. A huge amount of money could be saved from the initial construction investment, long term heating fee, air conditioning and other maintenance fee. From the above, European style single girder overhead crane is an advisable choice for the client.

European crane features

 European optimization design, light dead weight, small wheel load, and short size

  • Smooth and stable traveling
  • A variety of patterns of European cranes meet customers' needs
  • ABB, ABM ,Siemens etc three-in-one(motor, brake, reducer) motor are used on the European crane.
  • Electrics from Schneider, Siemens and other well-known brand are adopted by the European cranes.
  • Double lifting speed and inverter traveling speed are possible for the European crane.
  • Crane driving IP55, F class insulation, contact continuity reaches 40% ED
  • Overload warning, secondary class anti-clamp measures are also used on the European crane.
  • European cranes are with buffer.
  • Sound and light alarm devices are also used on the European cranes.
  • Circuit self-check protector, and flow phase lack protection

Anti-shake technology, this is one greatest advantage compare to the traditional crane. And it is with the following feature:

  1. Anti-shake function to prevent the European crane in a large inertial impact, bring the car to run a load hook swing.
  2. Anti-shake function can lift anti-sway within the full range of height of European crane.
  3. Anti-sway function independently set a load height of the knob, you can choose different depending on the height of the load at different heights, can be more precise control of the load rope factory, more precise control of the swing angle.
  4. Anti-sway control function can swing angle of plus or minus 0.25 degrees.
  5. Anti-shake function on the operator set up a separate switch for this function is activated.
  6. Anti-shake function allows the operator to not manually adjust the angle of yaw control can improve the stability of the entire process of handling and accuracy.

European crane case

Until now, our European cranes have been widely installed in the world, including the UK, Germany, Italy, France, USA, Australia, Canada and other countries, etc.
In the below photo, this is one European type gantry crane which is installed in the Australia.

European-crane-drawing

European crane : single girder gantry crane drawings
Lifting capacity:5tons
Lifting height:3.8m
Span: 15.5m.

This European crane has been finished the installations in the 2015.When the first time I talked with the customer, they send me their warehouse layout, from the layout, we see their whole height of warehouse is just about 4.6meters,but the customer requested the 3.8m lifting height. We checked the traditional crane is impossible to meet this requirement. Then we advised them the European crane: the low headroom single girder gantry crane.
Then the customer is very happy with this kind design and placed the order to us. Then production, sea delivery, etc.

European crane gantry crane

European Crane: European type gantry crane 

After the installations of European Crane, it is the time for customer to pass the Australia official testing (As we know ,the material lifting equipment is belong to the special machine ,it has been passed the testing so we can used).As a crane manufacturer, we are the few manufacturers who can handle the whole production lines from the crane parts(hook, wheel, pulley, winding drum, hoist, etc. ) to the whole set crane. So we can make sure that we sending the testing requirement needed specifications soon. Then the European crane passed the testing soon as we expected.
Dongqi Crane as the professional crane manufacturer, you can totally trust our design which will be the most suitable one for your application and crane quality which will be totally confirmed with the national standards and local standards of the application. If you have any question on European cranes or other lifting equipment, please feel free to contact us.
Dongqi Crane is here to lift you up.

Top