Electric Hoist Philippines: 1 Ton Electric Wire Rope Hoist for Sale

2 sets of 1 ton electric wire rope hoist for sale to Philippines. This is a long-term partner in Philippine. Mr. Joel is in the food industry, he has purchased single girder overhead crane and pillar jib crane in past six months. This is the third time he chose us Dongqi for getting cooperation. Thanks for the kindly trust for our client.

Firstly we got the inquiry, we confirmed the hoist type, lifting speed and application after detailed discussion with our client. According to client’s requirement, we recommend our 1 ton CD type wire rope hoist for his choice. The purchase plan is very urgent, so we reduce our production time to one week to meet customers request.

Main Parameters of 1 Ton Hoist for Sale:

• Capacity: 1 ton
• Lift height: 30m
• Lifting speed: 8m/min
• Traveling speed: 20m/min
• Power source: 220V/50Hz/3 Phase
• Working Grade: M4
• Country: Philippines

Details of 1 Ton electric wire rope hoist Design:

• Reducer: The third-class dead axle helical gear transmission structure is adopted; gear and gear axle are made of heat treated alloy steel, case and case cover with precise assembly and good seal are made of quality cast iron;the reducer is independent,so it is easy to load and unload it.
• Motor: Hoist Motor is an taper type rotor motor with braking, has bigger torque, can be adapted to moving frequently.
• Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation.
• Wire Rope: Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
• Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
• Electric control system: Composed of the contactor box, controlling switch, cut-off limiter. It has device with up and down stoke protection of break off limiter and can cut off main circuit in an emergency, which ensures safety operation of electric block. Electric elements are of long service life and operational safety.
• Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.
• Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting.
• Button switch: Easy to handle and has two modes of cord operation and cordless remote control.

1 Ton Rope Hoist Applicable Scope and Working Conditions:

• Applies to such an environment as no faire, no explosive danger.
• No corrosive media and no dirt exist.
• The temperature is between 20°C below zero and 40°C up zero.
• The wetness is no higher than 85%.
• The applicable power source is under your requirements.

How to Use Wire Rope electric hoist:

• Can be mounted on single beam overhead crane, bridge crane, gantry crane and arm cranes.
• With slight modification, electric wire rope hoist can also be used as a winch.
• Widely used in material handling and cargo handling in factory, mine field, railway paving site, goods station and warehouse, essential in raising working efficiency and improving working conditions.

Custom Service of Dongqi Wire Rope Hoists:

As a hoist manufacturer & supplier, Dongqi offers many types of electric rope hoists for your selection. Such as, FEM standard electric wire rope hoist, single speed wire rope electric hoist, double speed electric wire rope hoist, explosion proof wire rope electric hoist and metallurgical electric wire rope hoist, etc. Custom designs are available to meet exact requirements for any lifting, pulling, or positioning application. Welcome to email us to get your electric lifting hoist.